BOOMSTART 9L Manual Vacuum Oil Pump
Instructions for use:
1.With the engine off, open the hood and pull out the oil dipstick.
2. Adjust the pump hose locking clip so the hose end in the housing is the same length as the dipstick length.
3. Place the drain hose into the dipstick hole, making sure it touches the engine oil pan.
4. Close the pump drain valve.
5. Squeeze the vacuum suction handle 4-6 times until all the used oil is extracted.
6. Make sure how often and how much oil was pumped out and make a note of the amount of used oil extracted.
7. You can clean the pump after removing about 10-20 cars of used oil.
Safety briefing:
1. For safety reasons, please do not use gasoline or other flammable liquids or gases, toxic chemicals or corrosive ones fluids or battery fluid.
2. Do not put the pump in sunny, hot environment and protect it from snow, rain and direct sunlight.
3. The max temperature is 100℃.
4. Please drain the liquid completely and clean the pump after using it.